Continental PC200 Crimping System

Continental PC200 Crimping System
The PC200 is a high-volume, high-capacity, stationary crimper, utilizing microprocessor control for the fastest, most accurate crimping system available. Crimp settings, dwell time, pre-set start positions, and auto/manual operation are all easily set with electronic controls.

This production crimper is a quick and easy way to make factory-quality hose assemblies. The standard package is the PC200-1 crimper, which includes a 7.5 HP, 230V/3-phase pump and foot pedal.
The optional PC200-2 crimper includes a 7.5 HP, 480V/3-phase pump and foot pedal.
The optional PC200-3 (single phase) includes a 5 HP, 220V single-phase pump and foot pedal.

Features:
Hose feed is horizontal from both front or rear

Accurate electronic PLC crimp diameter adjustment

Manual or automatic mode

Maximum die opening: die closed diameter + 38 mm

340-ton cylinder

Automatic shut-off for precise crimps

Power return stroke and return limit control

Rapid retraction of die fingers through hydraulic system

Die sets easily changed using hand tool

Accommodates bent tube/elbow couplings with the ability to install 2", 90-degree fittings on both ends

Capability:
1/4" through 2" ID, 2-wire braid hose and 2" 6-spiral hose with all coupling end styles, including most bent tubes

Power Source:

7.5 HP, 230V AC, 3 phase, 60 Hz (PC200-1)

7.5 HP, 480V AC, 3 phase, 60 Hz (PC200-2)

5 HP, 220V AC, single phase, 60 Hz (PC200-3)

Oil Capacity: 8 gallons
Mounting: Bench or cabinet
Dimensions: 18.5" deep x 27.5" wide x 31.5" high (without die cabinet)
Weight: 573 lbs (excluding cabinet)